LG 32GP850-B 32p Nano IPS QHD 165Hz

Product Information

Overall, the LG 32GP850 is a pretty good monitor. It succeeds at taking what the 27GP850 provides and expanding that up to a larger 32-inch panel size, bringing with it the strengths and weaknesses of LG's Nano IPS panel technology. While performance isn't identical between the two sizes, it's similar enough to not have a significant impact on your buying decision. Just get whichever size you prefer. As you get good coverage of both sRGB and DCI-P3 color spaces, and the colors are consistent across the entire screen, you can even use the LG 32GP850 for professional color-critical work.

I don't miss the 240hz monitor. The pixel response times are an improvement over my previous monitor so it actually appears more fluid or same at a lower refresh rate. Always remember refresh rate means little if the response times aren't good enough. The 32GP850 is aimed at gaming and so we put it through its paces with our usual range of tests. First of all, we wanted to establish which was the optimal overdrive mode (‘Response Time’ setting in the OSD). Pursuit camera photos capturing perceived motion clarity in each response time mode at 180Hz refresh rate As the refresh rate lowered, the response time G2G remained basically the same, but the overshoot started to creep up as a result. On Native G-sync module screens the included variable overdrive technology is used to tone down the overdrive, reducing G2G response times a little, but helping to avoid overshoot problems. Since that hardware module is not used here, the G2G remains consistent, but overshoot starts to creep up. This only really started to become noticeable at the lower end of the refresh rate range and especially around 60Hz. The ‘Fast’ mode was a bit too aggressive here and you started to get some more noticeable pale artefacts and trails appearing on content. With that said, deltaE results on the whole are better in the sRGB mode than in the default mode, so my recommendation for those wanting to improve the color performance of the 32GP850 using OSD tweaks is to run the monitor in the sRGB mode. Calibrated Color PerformanceThis is a 32-inch 1440p IPS monitor with a maximum refresh rate of 180Hz. It's essentially a larger version of LG's 27GP850, it offers a very similar set of features, uses the same LG Nano IPS technology for the panel, and visually it's quite similar, too. However, as we've found many times in the past, using a panel from the same family doesn't guarantee the same performance at a different size, so that will be something to explore. Often even a higher peak luminance can be achieved under certain conditions. For example, when a smaller area/APL of the display is used for showing a bright object, when a bright object is displayed for a short time, etc. After a full calibration, performance improved again over what was achievable in the OSD. Greyscale results are tightened up nicely, and this leads to even better sRGB accuracy in our color tests, with deltaEs below 2.0 across the board. This is also the best way to use the monitor for wide gamut P3 work, as aside from some inaccuracies at the very outer edges of the gamut, calibrated performance is pretty good.

At a fixed 120Hz, the 32GP850 performs adequately, again a little slower than the 27-inch model, but with notably lower overshoot than something like the Gigabyte M32Q. Then at 60Hz, look again it's quite similar to other displays that we've tested and if you turn down the overdrive mode to the best for 60Hz gaming as we have done here for all monitors, you get no overshoot which is great for this refresh rate. The market is seeing a real push in this space for 32” 1440p displays and they are winning us over we have to say. The text and font size are still perfectly comfortable to use and sharp even at this larger screen size for general and office uses, and certainly no issue for gaming and multimedia. Today we are reviewing the monitor that LG didn't want us to review, the 32GP850. It's been a bit of a process to get this one out, far from the smoothest review process I've ever had, but today we'll be going over everything you need to know if you are interested in this display, which has been on sale for a couple of weeks now. While 4K UHD resolution would look much sharper on a 32″ monitor, 1440p is a lot less demanding to drive, allowing you to maintain a high frame rate with a decent mid-range graphics card. However, you really need a VA panel for the best contrast ratios as realistically all IPS panels have a bad contrast ratio. The Samsung Odyssey G7 offers more than twice the contrast ratio of any IPS monitor in this table and that has a noticeable effect on image quality for those that like to game in a dark environment.Gamut coverage – we provide measurements of the screens colour gamut relative to various reference spaces including sRGB, DCI-P3, Adobe RGB and Rec.2020. Coverage is shown in absolute numbers as well as relative, which helps identify where the coverage extends beyond a given reference space. A CIE-1976 chromaticity diagram (which provides improved accuracy compared with older CIE-1931 methods) is included which provides a visual representation of the monitors colour gamut as compared with sRGB, and if appropriate also relative to a wide gamut reference space such as DCI-P3. The inputs could be placed better. On my wall mount its fine because that's on the right side but my desk arm is on the left and can bind on the cables. Information of the number of pixels in a unit of length. With the decrease of the display size and the increase of its resolution, the pixel density increases.

The input lag is also comparable, though driving a 1440P display versus 1080P does cause its own slight lag (normal increased delay between frames from drop in performance). The LG 32GP850 has both AMD’s FreeSync Premium and NVIDIA’s G-SYNC Compatible certifications for tear-free gameplay up to 180FPS. The gamma is pretty close to the sRGB curve in this preset mode out of the box. The RGB balance is pretty good and we have an average colour temp across grey shades of 6816k, being slightly too cool. The white point is 6739k leaving a small 4% deviance from the target and again being slightly too cool. This all results in a moderate dE across the greyscale of 2.8. Auto Input Switch is also supported, so if you have multiple devices connected to the screen, the monitor will automatically change its input source to the detected signal.Approximate height of the display. If the manufacturer does not provide such information, the height is calculated from the diagonal and the aspect ratio.