BONTEC Dual Monitor Stand for 13-27 inch Screens, Ergonomic Desks Mount, Height Adjustable Arm Bracket Tilt 90° Swivel 180° Rotate 360°, VESA 75/100 White

Product Information

The Workstream by Monoprice single monitor arm is a no-frills solution that delivers basic monitor arm features at an exceptionally low price.

It provides a good range of adjustment, with 13.2 inches of height and 90 degrees of tilt, swivel, and rotation. The arm’s height and tilt adjustment are comparable to others on this list, but it can’t swivel in a full circle, which may prove annoying if you frequently move a monitor arm to share your screen with colleagues. The other factor to keep a close eye on is the weight limit of the monitor mount. While most of the mounts on our list have comparable maximum weights, it’s important to make sure your monitor won’t put too much strain on the arm before purchasing it. It’s easy to set up and use. The monitor’s clamp works similarly to other monitor arms I tested, but it’s more refined and requires fewer screws (a grommet is also available). The VESA mount is also excellent, providing a simple clip design that’s secure and can be easily pre-mounted to a monitor for simple installation. The way this mount works accommodates monitors that have a slightly recessed mount position, which may cause problems for other monitor arms. Additionally, some of the two monitor models have specific restrictions in regards to how wide the arms can go. This means that certain sizes of monitors, such as ultrawide monitors, might not be compatible with the dual arm models. Be sure to confirm that your monitors will fit on the arms even if they don’t exceed the weight limit. Ideal Ergonomics Two monitors are always better than one, and the same goes for monitor arms. It’s no surprise, then, that Ergotron’s LX Side-by-Side ranks as our best dual monitor arm. The Ergotron LX Side-by-Side pairs two LX monitor arms together on one mount. The look, feel, and specifications of each arm are close to its standalone sibling.The sleek, carefully engineered Kontour K1D sure looks the part, and this arm is far from just style over substance. Inside, the forged aluminium arms gas springs enable effortless, perfectly balanced height adjustment which can be easily fine-tuned for different monitor weights. Monitor arms are a great way to reduce the amount of desk space that your computer setup occupies. They also make your monitor look amazing, giving it a floating aesthetic that looks incredible if you’re creating a more minimal, clean-looking setup. The white MOMO monitor arms take up minimal space when you mount it on your desk. Save even more space by mounting the monitor arm on the wall behind your desk. In addition, neatly concealing the cables and having the monitor floating above the desk keeps your desk even more spacious. Choose comfort, health and sleek design with the white MOMO Monitor Arm! Fitting screens on the monitor arm

One of the most appealing benefits of monitor arms is the ergonomic improvement they can offer. If you’re wondering how to best set up your monitor arm, then we suggest using these guidelines developed by Professor Alan Hedge and Cornell University. They can even help improve the ergonomics and usability of your workspace. If you’ve ever wanted to free yourself from the chains of freestanding monitors, then keep reading. We’ll help you find the best monitor arm for your needs. Monitor size limits should be respected as well. It might be possible to attach a 40-inch monitor to an arm meant for a 32-inch monitor. The 40-inch monitor may even come within the arm’s weight limit. A larger monitor will distribute weight differently, however, which could cause an arm’s tension mechanism to fail. How we test monitor arms There are a variety of things that could lead people to use a monitor arm. For some, the ergonomics (and convenience) of being able to move your monitor exactly where you want, well, it’s something that can be hard to give up. For others, the desk space being saved by taking the monitor off the desk is invaluable. The Workstream’s slim budget is felt in its difficult setup and stiff operation. Users will need to install several screws for a clamp or gromet mount. More screws may need to be adjusted once the arm is in place, as its default tension proved inadequate for supporting a 32-inch monitor.

VESA Mounts

We’re not a fan of the arm’s installation. It has two clamps instead of one unified clamp, which is strange, because the base of the monitor arm is one solid piece. There are roughly a dozen screws to install. And the included cable routing can prove hard to tighten once several cables are held within the routing. Surprisingly, the Flo has a listed weight limit of 20 pounds and recommends use with monitors weighing at least 7 pounds. Most monitors fit within this range, but some heavier models won’t be compatible with the Flo.

The Premium Single Monitor Stand has a few limitations on its adjustability. The first is the pole, which is less than 8 inches tall and limits the monitor's maximum height. This shouldn't be an issue if you have a seated workstation, but it may not be tall enough if you like to switch between sitting and standing. The second is the tilt range, which at 75 degrees is considerably more limited than the other monitor arms on this list. First, let’s talk weight. The Ergotron HX is rated to hold monitors that weigh up to 42 pounds and screen sizes up to 49 inches. That’s an extraordinarily high weight limit—I haven’t reviewed a single monitor in 2023 that exceeds it. I attached both a 32-inch widescreen and 38-inch ultrawide monitor, which weighed roughly 15 and 20 pounds, respectively, and the HX easily handled both. One of the biggest draws of monitor arm stands is that they are highly adjustable, much more so than the standard freestanding mounts that most monitors come with. Monitor arms can adjust up and down easily, which many monitor stands cannot. Monitor arms can also adjust toward and away from you. It’s natural, given the only slight difference in name, to think the Ergotron HX is merely an uprated version of the Ergotron LX. That’s not the case. This is an entirely different monitor arm which pairs its increased capacity with improved build quality and a more professional look. The Huanuo HNDS12 represents a middle ground for shoppers who want an upgrade in quality but need to respect their budget.Monitor size is one exception: While the standard LX is rated for monitors up to 34 inches, the Side-by-Side’s arm is only rated for monitors up to 27 inches. The monitor arms aren’t long enough to fit two 32-inch or 34-inch monitors side-by-side. Vertical arrangements are also supported, though only if one of the two monitors is small (less than 23 inches diagonal). Storage & organisation Furniture Textiles Kitchenware & tableware Kitchens Lighting Decoration Rugs, mats & flooring Beds & mattresses Baby & children Smart home Bathroom products Laundry & cleaning Plants & plant pots Home electronics Home improvement Outdoor living Food & beverages Christmas Shop Shop by room Each arm is rated to hold between 4.4 and 14.3 pounds. That’s not a lot: The Workstream by Monoprice arm is rated up to 20 pounds. Still, it’s enough to handle a huge majority of 24- and 27-inch monitors, and the monitor arms provided plenty of lift in our testing.